[ Brakes, ABS ]  [ Library ]
driver found here
How-to: Get the ABS ring off of the rear brake rotor

How-to: Get the ABS ring off of the rear brake rotor

Table of Contents
Rear brakes "Kevin Conner" <kevin@rahavindesigns> Thu, 9 May 2002 09:36:05 -0500
Re: [gti-vr6] Rear brakes "Bob Tillman" <bobt@p-vector> Thu, 8 May 2003 10:48:19 -0400
RE: [gti-vr6] Rear brakes "Costas Charalambous" <gtivr6@freenet.de> Thu, 8 May 2003 10:53:21 -0400
RE: [gti-vr6] Rear brakes "Kevin Conner" <kconner@ailtd> Thu, 8 May 2003 10:48:24 -0500



From
From: "Kevin Conner" <kevin@rahavindesigns>
To: <list@gti-vr6>
Subject: Rear brakes
Date: Thu, 9 May 2002 09:36:05 -0500
  
	what is the best way to get the ABS ring off of the rear disc.

From
From: "Bob Tillman" <bobt@p-vector>
To: <kevin@rahavindesigns>, <list@gti-vr6>
Subject: Re: [gti-vr6] Rear brakes
Date: Thu, 8 May 2003 10:48:19 -0400
  
You can push on the back side of the ABS ring if you use a long thin
screwdriver through the lug bolt holes.  Give the screwdriver a couple of
hammer taps, and then move on to the next hole, working your way around.

Good luck,
- Bob T.

From
From: "Costas Charalambous" <gtivr6@freenet.de>
To: <list@gti-vr6>
Subject: RE: [gti-vr6] Rear brakes
Date: Thu, 8 May 2003 10:53:21 -0400
  
I took a T-handle allen wrench and tapped it out from the other side.
Left one popped right out, the right one was a little stubborn.

-Costas

From
From: "Kevin Conner" <kconner@ailtd>
To: <gtivr6@freenet.de>, "Gti VR6 Net \(E-mail\)" <list@gti-vr6>
Subject: RE: [gti-vr6] Rear brakes
Date: Thu, 8 May 2003 10:48:24 -0500
  
	Ok just got back from my mechanic they used a torch to heat it up a bit and
then it popped right off, just in case anyone is wondering.

thanx k

Stubborn Bugger Edition.

[ Brakes, ABS ]  [ Library ]
driver found here