$50 for a jack and two stands, plus about another $20 for a ratchet and
17MM socket, so figure about $70 to get it done. Haven't you ever heard of
working in the street like us white trash Kentucky crackers? :)

Seriously, I don't expect it would take more than an hour to do it. Add an
hour for bullshit time to make it 2. I can get a whole axle assembly
removed in about 3 (working out in the yard), so loosening the bolts and
moving the axle should be even quicker. Figure the cost based on your fav
garage's labour rates.

Josh

At 10:29 PM 10/22/98 -0400, Alkemyst wrote:
>My rear wheels do not sit centered in the fenders.  The passenger side is
>about 1/4 inch back and the driver side is about 1/4" forward.  I understand
>there is like six bolts to loosen, but I don't have the facilities to do it
>here.  What is a fair garage price for this?
>
>Thanks
>
>Chris
>/--------------------------- alkemystshadow ---------------------------\
>| Christopher Feeny <Alkemyst>  :  online  :   Web Page and Graphics Design |
>| 97 Volkswagen GTI VR6         : since 83 :GA586ATM/P,32MB,2.1GB,4MB Video |
>| Candy White & Black Leather   : lutz,qsd :   Eclipse 5332, JL Audio 6CS3, |
>| Spax with Carrera Coilovers   -==(UDIC)==-       Eclipse 3121...more soon |
>| Konig GT-R's w/ 205/40ZR17 Nitto 501's, no suitcase, TT chip, short shift |
>\------------------------------ 561-798-5126 -------------------------------/
>--
>For info on: how to subscribe & unsubscribe, the list's tech/how-to
>    library, etc.  see:   
>
Josh Tibbs
xjoshone


http://w3.one.net/~xjosh

--
For info on: how to subscribe & unsubscribe, the list's tech/how-to
    library, etc.  see: