Before I removed my ECU to put the chip in, I took note of the placement and
color of the paint on the mounting screws. It was sort of off-white, creme
colored. After replacing it, I put Buff-colored White-Out on the bolts.
Looks stock.
As for the 4 torx screws, when I removed them and put them back on, the blue
paint was still in good shape. But just to be safe, use a blue Sharpie on
those suckers, being careful to align any marks on the screw-head to the
marks on the ECU itself.

-----Original Message-----
From: Eric Liew <eliewnkhw>
To: deeceeexit109 <deeceeexit109>
Cc: Arthur Emerson <emersoneideti>; gti-vr6dev.tivoli
<gti-vr6dev.tivoli>
Date: Friday, August 07, 1998 10:02 AM
Subject: Re: [gti-vr6] Guess What I heard today?


>At around 09:34 PM 8/6/98 -0400, The All-Knowing deeceeexit109 had
>a
>revelation and said :
>>While checking the car the OTS asked if there was an over rev code
>stored.
>>Also he made me lift up the rain shield to see if the ECM has been
>removed
>>and chipped. For the customers sake I am glad the white stuff was still
>on
>>the mounting stud. If the ECM was chipped he was disallow warranty
>coverage.
>
>Where can we get some of this "white stuff" [what is it? paint?] to
>repaint
>our ECU mounting bolts with?
>
>el
>
>98 Black GTI VR6 Stealth Chipped Edition
>
>---
>Eric Liew
>Information Technologies Manager
>NKH&W, Inc.
>600 Broadway, 5th Floor
>Kansas City, MO 64105
>
>Voice: (816) 842-8881
>Direct: (816) 460-3025
>Fax: (816) 842-1156