Four sets of blinks counting out each of the diagnostic code's four digits,
one blink for 1, two blinks for 2, etc.
This sequence is repeated automatically, until the jumper is re-installed,
or until ignition is turned off.
Perform this sequence repeatedly
to see all the stored MIL codes.
approx. 2 secs
When the MIL flashes 4-4-4-4 (four long blips),
there are no more diagnostic codes.
This 4-4-4-4 sequence is repeated automatically, until the jumper is re-installed,
or until ignition is turned off.
