The TT brake and clutch covers do fit on the stock Mk3 pedals, and so does the gas pedal cover, with a little
careful bending. The problem is that unless you glue them down, the first time you accidentally kick one of
the pedals, the cover comes right off. I just put a little epoxy around the edges and I haven't kicked one off
yet.

The dead pedal is a different story. The entire pedal has to be cut down to fit the floor board (Potterman
sells pre-cut dead pedals for Mk3s), you have to undo the hood release cable and move some wires to/from the
fuse panel, etc. It's not difficult, but it's definitely not the simple swap that the 3 main pedals are.

--Griff