How-to: Polishing AutoTech front stress bar

[ Body/Appearance - Interior ] [ Library ]
driverfoundhere How-to: Polishing AutoTech front stress bar

Table of Contents
[gti-vr6] Polishing front bar	"Rodrigues, Manuel" <Manny.Rodriguesusa.xerox>	Wed, 23 Jun 1999 13:06:42 -0500
[gti-vr6] Polishing Autotech Bar	Ivey Johson <quickvr6earthlink>	Tue, 22 Jun 1999 20:41:17 -0400

From gti-vr6-ownerccsi Wed Jun 23 13:09 CDT 1999
From:	"Rodrigues, Manuel" <Manny.Rodriguesusa.xerox>
To:	"'GTI VR6 List'" <gti-vr6cobra.ccsi>
Subject:	[gti-vr6] Polishing front bar
Date:	Wed, 23 Jun 1999 13:06:42 -0500
	Guys, I used NEVR-DULL, which is now made by Eagle One, to polish the aluminum cross bar of my AutoTech front strut tower brace. Thanks to Greg Coe for the suggestion, it worked GREAT! Manny -- For info on: how to subscribe & unsubscribe, the list's tech/how-to library, etc. see:

From gti-vr6-ownerccsi Tue Jun 22 19:49 CDT 1999
From:	Ivey Johson <quickvr6earthlink>
To:	GTI-VR6 List <gti-vr6ccsi>
Subject:	[gti-vr6] Polishing Autotech Bar
Date:	Tue, 22 Jun 1999 20:41:17 -0400
	For those of you who have an Autotech stress bar with the dull aluminum finish, you may want to try this method. I used fine steel wool on the entire bar, then used the old Brasso polish to bring it up to an almost chrome like luster. I think manny used a Never Dull polishing cloth on his bar, whatever works. Bill Johnson 2Quick6 -- For info on: how to subscribe & unsubscribe, the list's tech/how-to library, etc. see: